1、概述

　　聲級計是一種與人耳大致相同的方式響應聲音的儀器。使用聲級計的目的是對聲壓級進行客觀、可重復的測量。

　　聲級計和噪音計通常用于描述同一種儀器。在談到聲級計時，主要區別在于精度的分類（由國際標準定義）。當然，所有的Bruel&Kjaer的聲級計都符合最高的國家標準和國際標準。

　　2、如何使用聲級計

　　B&K的聲級計可用于各種行業和應用，例如:

　　優化建筑物的聲學和振動

　　聲功率和噪聲源識別

　　產品噪聲識別

　　工作噪聲評估和OHS評估

　　當?shù)睾蛧?guó)家環境噪聲及振動合規性

　　3、基本參數

　　4:詳細說明

　　Measuring Ranges :

　　Note * : Level non-linearity caused by noise floor is < 0.4 dB at 30 dBA, re IEC 651 and < 1 dB at 26 dBA

　　Note 1 : with crest factor = 10 or 20 dB

　　Noise Floor :

　　Typically 18 dBA

　　Maximum : 20 dBA RMS

　　Includes preamplifier's electrical noise and microphone's thermal noise

　　Detectors : simultaneous RMS and Peak with independent frequency weightings

　　Linearity Range : 80 dB

　　Pulse Range : 83 dB

　　Non-linear Distortion : too small to affect accuracy

　　Peak Detector Rise Time : < 50 ms

　　Frequency Weightings : selected independently for RMS and Peak

　　RMS A and C : according to IEC 651 Type 1

　　RMS L : flat from 10 Hz to 20 kHz ± 2 dB with Type 1 tolerances

　　Peak C : according to IEC 651 Type 1

　　Peak L : flat from 10 Hz to 20 kHz ± 2 dB with Type 1 tolerances

　　Time Weightings : Fast, Slow, Impulse, according to IEC 651 Type 1

　　Display : 4 line LCD showing:

　　Measuring range and quasi-analogue bar showing input signal

　　Battery low, pause and overload with hold indicators

　　Time weighting and elapsed measurement time

　　Optional back light

　　The quasi-analogue bar is updated 15 times per second

　　Displayed parameter level updated once per second

　　Parameters :

　　MaxL, MinL, MaxP, Peak, SPL, Leq, SEL, LEP,d and Overload in % of measurement time + variable Ln, default values L90, L50 and L10

　　Exchange Rate : 3

　　Resolution :

　　LN Values : 0.5 dB

　　Other Parameters : 0.1 dB

　　Reset :

　　Resets Buffer including elapsed time to zero. Warning prior to reset if elapsed time > 1 min.

　　Reset when changing frequency or time weighting

　　Resets all results in Log, Memory and Buffer if held down together with (Data)

　　Optional reset when changing level of measurement range, Lns not available if range change is without reset

　　Microphone : Type 4188 pre polarized free-field 1/2" condenser microphone

　　Sensitivity : -30 dB re 1 V/Pa ± 2 dB

　　Frequency Range : 8 Hz to 12.5 kHz ± 2 dB

　　Capacitance : 12 pF

　　Memory : 40 Records of Overall Results

　　Result Logging : Leq : L10 and L90

　　Log Rate : 1 s : 10 s : 30 s : 1 m : 5 m : 10 m : 15 m : 30 m and 60 m.

　　Memory Capacity : 512 Kbytes, equivalent to 86400 sets of results (for example, 24 hours of 1 s logging)

　　Serial Interface : Compatible with EIA-574

　　Baud Rate : 1200 - 19200

　　Data Bits : 8

　　Stop Bit : 1

　　Parity : none

　　Handshake : Hardwired, XON / XOFF or None

　　Results Output Format :

　　Overall : Logged 2318 printer : Logged spreadsheet : Level Distribution : Cumulative Distribution : Distribution resolution 1 to 5 dB

　　Heading : long or short

　　DC Output : Short circuit protected coaxial Lemo socket (series 00)

　　Output : 50 mV/dB equivalent to 0 - 4.15 V

　　Output Resistance : 100 Ω

　　Output Parameter : same as the Displayed Parameter

　　AC Output : Short circuit protected coaxial Lemo socket (series 00)

　　Maximum Output : 0.5 V RMS corresponding to the top of the selected measurement range ± 2 dB depending on the microphone's sensitivity

　　Output Resistance : 100 Ω

　　Output : output signal from preamplifier (L frequency weighting)

　　Clock : real time, calendar and measurement duration

　　Warm up Time : < 5 s

　　Settling Time : at range change without reset: < 4 ms

　　Calibration Conditions :

　　Reference Frequency : 1000 Hz

　　Reference SPL : 94 dB

　　Reference Range : 50 - 130 dB, set automatically during calibration sequence

　　Reference Incidence : Frontal

　　Environmental :

　　Storage Temperature : -25 to +70 ° C

　　Operating Temperature : -10 to +50 °C

　　Effect of Temperature : < 0.5 dB, -10 to +50 °C

　　Effect of **midity : < 0.5 dB for 30 %RH at 40 °C and 1 kHz

　　Vibration Sensitivity : < 80 dB with L-weighting at 1 m/s-2

　　Magnetic Field : 80 A/m, 1?rsted at 50 Hz gives < 34 dBL

　　Power Supply - Internal :

　　Batteries : 4 x 1.5 V LR6 / AA size alkaline cells

　　Battery Life : > 12 hours, typically

　　Back up battery : keeps clock and memories operating for at least 6 months, if fully charged

　　External Power Supply:

　　Voltage : 7 - 15 V DC regulated

　　Voltage Ripple : < 100 mV peak to peak

　　Maximum Current : 400 mA

　　Average Current : 100 mA at 7 V

　　External Power Supply Socket :

　　Socket Pin: Positive

　　Socket Casing : Signal Ground

　　Socket Pin Diameter : 2.0 mm

　　Socket External Diameter : 5.5 mm

　　Dimensions and Weight :

　　Size : 257 mm x 97 mm x 41 mm

　　Weight : 460 g including batteries

　　深圳市聲儀科技有限公司為您提供丹麥BK Type2236 聲級計/音壓計的詳細產品價格、產品圖片等產品介紹信息，您可以直接聯系我們獲取丹麥BK Type2236 聲級計/音壓計的具體資料，聯系時請說明是在中科看到的。